27Jun
Posted in Hard Drive Upgrade by manyu |
While the release of new products, companies generally give the corresponding indicators of read and write performance , these indicators of different capacity models are not the same. We will test four different types of OCZ Vertex 2 series, take a performance comparison test to view how much different of their actual performance in the [...]
19Jun
Posted in Hard Disk Data Recovery by manyu |
Hard drive has a price, the data is priceless. To get a real genuine hard drive.Will need to use some hard disk detection tools to check, here are top 6 hard disk drive detection softwares.The following software capacity is not large, we usually can put it on U disk, mobile phones and other mobile [...]
16Jun
Posted in Hard Drive Upgrade by manyu |
Nowadays, the most mainstream operating system is Windows 7. However, many people began to feel their win 7 is so slow? In fact, this is many reasons, such as loading too many things, memory is not enough (basically this is a very far-fetched, personally think that the 2G memory running win7, no problem) and so [...]
11Jun
Posted in Hard Drive Upgrade by manyu |
At present, the main methods of operating system installation is through CD-ROM, then is the USB and hard disk mode, also there is the method to use the network to install OS. Most of the Linux-derived products can be installed on the hard disk, today i will share my experience about installing Ubuntu from hard [...]
4Jun
Posted in Hard Drive Upgrade by manyu |
If you have two hard drive and want to setup master slave setup hard drive on Windows 7, format the main hard drive and leave the other hard drive as is, you don’t need RAID. If these are both IDE drives, set your current drive to master and the new drive to slave. If these are SATA [...]
4Jun
Posted in Hard Drive Upgrade by manyu |
To setup and partition a level 0 RAID array, and install operation system is easy, here is the step you could following!
1) Attach the drives to the RAID controller. Each drive should be master on its own channel (separate cable) for maximum performance.
2) Enter the RAID controller bios (usually you press CTRL+H after powering on the [...]